BOXLIGHT Projector CP 635i User Manual

Multimedia LCD Projector  
CP-635i  
USER'S MANUAL  
Please read this user's manual thoroughly to ensure correct usage through understanding.  
BEDIENUNGSANLEITUNG  
Bitte lessen Sie diese Bedienungsanleitung zugunsten der korrekten Bedienung  
aufmerksam.  
MANUEL D'UTILISATION  
Nous vous recommandons de lire attentivement ce manuel pour bien assimiler le  
fonctionnement de l'appareil.  
MANUALE D'ISTRUZIONI  
Vi preghiamo voler leggere attentamente il manuale d'sitruzioni in modo tale da poter  
comprendere quanto riportato ai fini di un corretto utilizzo del proiettore.  
MANUAL DE USUARIO  
Lea cuidadosamente este manual del usuario para poder utilizar corretamente el  
producto.  
GEBRUIKSAANWIJIZING  
Lees voor het qebruik alstublieft deze handleiding aandachtig door, om volledig profijt te  
hebben van de uitgebreide mogelijkheden.  
BRUKERHÅNDBOK  
Vennligst les denne bruksanvisningen grundig for å være garantert driftssikker bruk.  
INSTRUÇÕES DO PROPRIETÁRIO  
Para assegurar o uso correto do equipamento, por favor leia atentamente este manual do  
usuário.  
TECHNICAL  
REGULATORY NOTICES  
 
FEATURES  
This liquid crystal projector is used to project various computer signals as well as NTSC / PAL /  
SECAM video signals onto a screen. Little space is required for installation and large images can  
easily be realized.  
Outstanding Brightness  
The UHB lamp and high-efficiency optical system assure a high level of brightness.  
Partial Magnification Function  
Interesting parts of images can be magnified for closer viewing.  
Distortion Correction Function  
Distortion-free images are quickly available.  
Extra-low Noise Function  
Acoustic noise level from the unit can be reduced.  
BEFORE USE  
Contents of Package  
Make sure all of the following items are included in the package. If anything is missing, please  
contact BOXLIGHT at 800-762-5757 or 360-779-7901.  
NOTE Keep the original packing material for future reshipment.  
Power Cord  
(Europe Type)  
Power Cord  
(US Type)  
Projector  
Liquid Crystal Projector  
CP-S370W  
USER'S MANUAL  
Please read this user's manual thoroughly to ensure correct usage through understanding.  
BEDIENUNGSANLEITUNG  
Bitte lessen Sie diese Bedienungsanleitung zugunsten der korrekten Bedienung  
aufmerksam.  
MANUEL D'UTILISATION  
Nous vous recommandons de lire attentivement ce manuel pour bien assimiler le  
fonctionnement de l'appareil.  
MANUALE D'ISTRUZIONI  
Vi preghiamo voler leggere attentamente il manuale d'sitruzioni in modo tale da poter  
comprendere quanto riportato ai fini di un corretto utilizzo del proiettore.  
MANUAL DE USUARIO  
Lea cuidadosamente este manual del usuario para poder utilizar corretamente el  
producto.  
GEBRUIKSAANWIJIZING  
Lees voor het qebruik alstublieft deze handleiding aandachtig door, om volledig profijt te  
hebben van de uitgebreide mogelijkheden.  
BRUKERHÅNDBOK  
Vennligst les denne bruksanvisningen grundig for  
å
være garantert driftssikker bruk.  
Mouse cable  
(PS/2)  
Component  
Video Cable  
(with green lead)  
RGB Cable  
INSTRUÇÕES DO PROPRIETÁRIO  
uso correto do equipamento, por favor leia atentamente este manual do  
Para assegurar  
usuário.  
o
TECHNICAL  
REGULATORY NOTICES  
User’s Manual  
(this manual)  
STANDBY/ON  
KEYSTONE  
VIDEO RGB  
Safety Instructions  
MENU  
SELECT  
MENU  
RESET  
POSITION  
MAGNIFY  
FREEZE VOLUME  
MUTE  
Handle  
OFF  
AUTO  
BLANK  
Remote Controller  
containing Battery  
Carrying Bag  
ENGLISH-2  
 
BEFORE USE (continued)  
Part Names  
Speaker  
Zoom Knob  
Focus Ring  
Handle Hook  
Power Switch  
Remote Control Sensor  
Lens  
AC Inlet  
(to the Power Cord)  
Lens Cap  
Foot Adjuster  
Ventilation Openings  
(Intake)  
FRONT/LEFT VIEW OF  
THE PROJECTOR  
Control Panel (Refer to P.9 "OPERATIONS")  
INPUT Button  
STANDBY/ON Button  
KEYSTONE Button  
LAMP Indicator  
TEMP Indicator  
POWER Indicator  
RESET Button  
MENU Button  
Foot Adjuster Button  
Filter Cover  
Air Filter and Intake  
for the Cooling Fan  
(
)
Ventilation Openings  
(exhaust)  
Rear Foot Adjuster  
REAR/RIGHT VIEW OF  
THE PROJECTOR  
Terminal Panel  
(Refer below)  
S-VIDEO Terminal  
COMPONENT VIDEO  
Y Terminal  
Remote Control Sensor  
RGB IN 1 Terminal  
RGB IN 2 Terminal  
CB/PB Terminal  
CR/PR Terminal  
1
RGB IN  
2
AUDIO IN VIDEO IN S-VIDEO IN  
VIDEO IN Terminal  
AUDIO IN R Terminal  
AUDIO IN L Terminal  
AUDIO IN 1 Terminal  
AUDIO IN 2 Terminal  
AUDIO OUT Terminal  
AUDIO  
IN  
1
2
AUDIO OUT  
USB  
RGB OUT  
CONTROL  
CONTROL Terminal  
RGB OUT Terminal  
USB Terminal  
TERMINAL PANEL  
ENGLISH-3  
BEFORE USE (continued)  
Part Names (continued)  
VIDEO Button  
STANDBY/ON  
VIDEO RGB  
STANDBY/ON Button  
KEYSTONE Button  
Button  
RGB Button  
KEYSTONE  
MENU SELECT Button  
Used to click the left  
mouse button.  
MENU  
SELECT  
Used to operate  
the mouse shift  
function .  
POSITION Button  
RESET Button  
MENU  
RESET  
POSITION  
Used to click the right  
mouse button.  
MENU Button  
MAGNIFY  
MAGNIFY  
MAGNIFY  
Button  
Button  
Button  
MAGNIFY  
FREEZE VOLUME  
MUTE  
VOLUME  
VOLUME  
Button  
Button  
OFF  
OFF  
FREEZE Button  
MUTE Button  
BLANK Button  
AUTO  
BLANK  
AUTO Button  
Battery Holder  
REMOTE CONTROLLER  
(Refer to P.9 "OPERATIONS")  
These functions work when the mouse control function is activated. Remember, the POSITION,  
VOLUME, KEYSTONE, BLANK ON and MENU ON functions disable the mouse control function.  
NOTE • Keep the remote controller away from children and pets.  
• Do not give the remote controller any physical impact. Take care not to drop.  
• Do not place the heavy objects on the remote controller.  
• Do not wet the remote controller or place it on any wet object.  
• Do not place the remote controller close to the cooling fan of the projector.  
• Do not disassemble the remote controller.  
ENGLISH-4  
 
BEFORE USE (continued)  
Loading the Battery  
First Loading:  
In original packing, the battery is installed in the battery holder of  
the remote controller with protection film (the transparent film some  
of which is inside the battery holder). Pull out the protection film to  
load the battery.  
+side  
Replacing:  
1. See the reverse side of the remote controller.  
2. Pinch the groove and pull out battery holder as the drawing right.  
Pull out  
3. Remove the worn battery.  
4. Install the new battery with “+” side facing.  
5. Push in and click the battery holder.  
Battery Holder  
CAUTION  
Incorrect handling of the battery could result in fire or personal injury. The  
battery may explode if not handled properly. Be careful in handling the battery  
according to instructions of accompaning manual "SAFETY INSTRUCTIONS" and this  
manual.  
• Use the 3V micro lithium battery type no.CR2025 only.  
• When loading the battery, make sure the plus and minus terminals are correctly oriented as  
indicated in the remote controller.  
• When you dispose the battery, you should obey the law in the relative area or country.  
• Keep the battery away from children and pets.  
• When not to be used for an extended period, remove the battery from the remote controller.  
NOTE Replace the batteries when remote control transmitter operation becomes difficult.  
Fixing the Handle  
Fix the enclosed handle if you need.  
1. Raise up the handle hook, and pass one end of the  
handle through the hole of handle hook.  
2. Buckle the end of the handle, as the right drawing.  
3. Fix the other end of the handle to the other handle  
hook in the same way.  
2
1
CAUTION • Make sure the handle is fixed before carrying the projector with  
the handle. If the projector should be dropped from the handle should be off,  
it could result in an injury, and continued use could result in fire or electrical  
shock. Do not flourish the projector with the handle.  
ENGLISH-5  
INSTALLATION  
Installation of the Projector and Screen  
Refer to the drawing and table below for determining the screen size and projection distance.  
The projection distances shown in the table below are for  
full size (800 x 600 dots).  
a: Distance from the projector to the screen. ( 10%)  
Table 1. Installation Reference  
a [inches (m)]  
Screen size  
[inches (m)]  
Min.  
Max.  
Top View  
40 (1.0)  
60 (1.5)  
62 (1.6)  
94 (2.4)  
82 (2.1)  
123 (3.1)  
164 (4.2)  
205 (5.2)  
246 (6.3)  
308 (7.8)  
411 (10.4)  
80 (2.0)  
127 (3.2)  
160 (4.1)  
192 (4.9)  
241 (6.1)  
323 (8.2)  
100 (2.5)  
120 (3.0)  
150 (3.8)  
200 (5.0)  
a
Side View  
CAUTION • Install the projector in a suitable environment according to instructions of  
the accompanying manual “SAFETY INSTRUCTIONS” and this manual.  
• When you fix this unit with a metal tool and the like, you must connect it with ground  
wire; otherwise, fire or electric shock can result.  
Connect the ground terminal of AC inlet of this unit with the ground terminal provided at the  
building using an optional three-core power-supply cord.  
• Please basically use liquid crystal projector at the horizontal position. If you use liquid  
crystal projector by the lens up position, the lens down position and the side up position, this  
may cause the heat inside to build up and cause damage. Be especially careful not to install it  
with ventilation holes blocked.  
• Do not install LCD projector in smoke effected environment. Smoke residue may buildup  
on critical parts (i.e.LCD panel, Lens Assy etc.).  
Angle Adjustment  
Use the foot adjusters on the bottom of the projector to adjust the projection angle. It is variable  
within 0˚ to 9˚ approximately.  
Foot Adjuster  
Press the foot adjuster button  
Rear Foot Adjuster  
1. Lift up the front side of the projector, and pressing the foot adjuster button, adjust the projection  
angle.  
2. Release the button to lock at the desired angle.  
3. Use the rear foot adjuster to adjust the left-right slope. Do not force the foot adjuster screw.  
This could damage the adjuster or cause the lock to fail.  
CAUTION • Do not release the foot adjuster button unless the projector is being held;  
otherwise, the projector could overturn or fingers could get caught and cause personal  
injury.  
ENGLISH-6  
 
INSTALLATION (continued)  
Cabling  
Refer to the table below for connecting each terminal of the projector to a device.  
Table 2. Cabling  
Function  
Terminal  
Cable  
RGB IN 1  
RGB IN 2  
RGB OUT  
RGB input  
RGB cable with D-sub 15-pin shrink jack  
and inch thread screws  
RGB output  
AUDIO IN 1  
(interlocked with RGB IN 1)  
Audio input  
(from the computer)  
Audio cable with stereo mini jack  
AUDIO IN 2  
(interlocked with RGB IN 2)  
PS/2 mouse control  
ADB mouse control  
Serial mouse control  
RS-232C communication  
USB mouse control  
S-video input  
PS/2 mouse cable  
ADB mouse cable  
Serial mouse cable  
RS-232C cable  
CONTROL  
USB  
USB cable  
S-VIDEO IN  
S-video cable with mini DIN 4-pin jack  
Video/Audio cable  
Video input  
VIDEO IN  
COMPONENT VIDEO Y  
COMPONENT VIDEO CB/PB  
COMPONENT VIDEO CR/PR  
AUDIO IN L  
Component video input  
Component video cable  
Audio input  
(from video equipment)  
Video/Audio cable or optional audio cable  
with RCA jack  
AUDIO IN R  
Audio output  
AUDIO OUT  
Audio cable with stereo mini jack  
CAUTION • Incorrect connecting could result in fire or electrical shock.  
Please read this manual and the separate “SAFETY INSTRUCTIONS”.  
• Before connecting, turn off to all devices to be connected, except for the USB  
cable.  
• The cables may have to be used with the core set to the projector side. Use the  
cables which are included with the projector or specified.  
NOTE • Before connecting, read instruction manuals of the devices to be connected, and make sure that the  
projector is compatible with the device.  
• Secure the screws on the connectors and tighten.  
• For some RGB input modes, the optional Mac adapter is necessary.  
• Some computers may have multiple display screen modes. Use of some of these modes will not be possible  
with this projector.  
• Refer to the “TECHNICAL” section for the pin assignment of connectors and RS-232C communication data.  
ENGLISH-7  
INSTALLATION (continued)  
Power Connection  
Use the correct power cord depending on the power outlet to be used.  
Connect the AC inlet of the projector to the power outlet firmly by the power cord.  
CAUTION • Be carful in handling the power  
cord according to instructions of the  
accompanying manual "SAFETY INSTRUCTIONS"  
and this manual.  
Power  
outlet  
• Connect the power cord firmly. Avoid using a  
loose, unsound outlet failed or contact.  
Power Cord  
AC Inlet  
Example of System Setup  
Display  
Monitor  
COMPONENT VIDEO  
DVD Player  
1
RGB IN  
2
AUDIO IN VIDEO IN S-VIDEO IN  
AUDIO 1  
IN  
2
AUDIO OUT  
USB  
RGB OUT  
CONTROL  
S-Video Tape  
Recorder  
Computer  
(notebook type)  
Speaker with  
amplifier  
Computer  
(desktop type)  
NOTE • When connecting with a notebook computer, set the proper RGB external image output  
(setting CRT display or simultaneous display of LCD and CRT). Please read instruction manual of  
the notebook for more information.  
Plug & Play  
This projector is VESA DDC 1/2B compatible. Plug & play is possible by connecting to a computer  
that is VESA DDC (Display Data Channel) compatible.  
Please use this function by connecting the accessory RGB cable with RGB IN 1 terminal (DDC  
1/2B compatible). Plug & play may not operate by other connections.  
NOTE • Plug & play is a system configured with peripheral equipment including a computer,  
display and an operating system.  
• This projector is recognized as a plug & play monitor. Use the standard display drivers.  
• Plug & play may not operate by the computer to connect. Use the RGB IN 2 terminal if plug &  
play does not operate correctly.  
ENGLISH-8  
 
OPERATIONS  
STANDBY/ON  
KEYSTONE  
VIDEO RGB  
STANDBY/  
ON Button  
STANDBY/ON Button  
POWER Indicator  
MENU  
SELECT  
MENU  
RESET  
POSITION  
MAGNIFY  
FREEZE VOLUME  
MUTE  
Zoom Knob  
OFF  
AUTO  
BLANK  
Focus Ring  
Power Switch  
Lens Cap  
Power ON  
1. Check that the power cord is connected correctly.  
2. Set the power switch to [ | ]. The standby mode is selected, and the POWER indicator is turned to  
orange.  
3. Press the STANDBY/ON button  
on the control panel or the remote control transmitter.  
Warm-up begins and the POWER indicator blinks in green.  
4. The POWER indicator ceases blinking and turns to green when power is on. Remove the lens cap.  
5. Adjust picture size using the zoom knob.  
6. Adjust focus using the focus ring .  
Power OFF  
1. Press the STANDBY/ON button  
on the control panel or the remote controller. Then,the  
message "Power off?" will appear on the screen, and the message will disappear by any operation  
or no operation for 5 seconds. During this message indication, press the STANDBY/ON  
button again. The projector lamp is extinguished and lamp cooling begins. The POWER indicator  
blinks orange during lamp cooling. Pressing the STANDBY/ON button  
the POWER indicator is blinking.  
has no effect while  
2. The system assumes the Standby mode when cooling is complete, and the POWER indicator  
ceases blinking and changes to orange. Check that the indicator is orange and set the power  
switch to [O].  
3. The POWER indicator is extinguished when power is off. Do not forget to replace the lens cap.  
WARNING • Please read this manual, and the separate “SAFETY  
INSTRUCTIONS” thoroughly before using the equipment. Always ensure that  
the equipment is used safely.  
NOTE Except in emergencies, follow the above-mentioned procedure for turning power off. If the  
projector is used improperly, it may very difficult to turn off the projector caused by heating inside the  
unit. And the reduction of life time of lamp and LCD panels will be caused by incorrect procedure.  
• To prevent any trouble, turn on/off the projector when the computer or video tape recorder is OFF.  
Providing a RS-232C cable is connected, turn on the computer before the projector.  
• When a projector continues projecting the same image, the image may remain as an afterimage.  
Please do not project the image same for a long time.  
ENGLISH-9  
OPERATIONS (continued)  
Basic Operation  
The basic operations shown in Table 3 is performed from the supplied remote control transmitter or  
the projector control panel. Items indicated by (*) may be used from the control panel.  
Table 3 . Basic Operation  
Item  
Description  
Select Input Signal (*) : Press the INPUT button.  
RGB IN 1RGB IN 2VIDEO IN S-VIDEO IN COMPONENT VIDEO (RGB IN 1)  
Select RGB Input : Press the RGB button.  
VIDEO IN / S-VIDEO IN / COMPONENT VIDEO RGB IN 1 / RGB IN 2  
RGB IN 1 RGB IN 2 (RGB IN 1)  
Select Video Input : Press the VIDEO button.  
INPUT  
SELECT  
RGB IN 1 / RGB IN 2 VIDEO IN / S-VIDEO IN / COMPONENT VIDEO  
VIDEO IN S-VIDEO IN COMPONENT VIDEO (VIDEO IN)  
The selected signal name is displayed for approximately 3 seconds when the input  
signal is changed.  
Set/Clear Position Adjustment Mode : Press the POSITION button.  
The [ ] icon is displayed in the POSITION mode.  
Image Position Adjustment: Press the  
,
,
and  
buttons in the  
POSITION mode.  
Valid only in the MAGNIFY mode with a video signal is input.  
POSITION  
After approximately 10 seconds of inactivity the [ ] icon is extinguished and the  
POSITION mode is cleared automatically.  
,
,
and  
buttons may operate as the mouse control button. Refer to page 4.  
Initialize Each Item : Select an item and press the RESET button.  
Initialize Position Adjustment : Press the RESET button and the  
POSITION mode. This function is valid only when RGB signal is input.  
Valid except for the VOLUME, LANGUAGE and H PHASE.  
RESET (*)  
The RESET button may operate as the mouse control button. Refer to page 4.  
Set MAGNIFY Mode : Press the MAGNIFY  
button.  
Move Magnified Area : Run the POSITION in the MAGNIFY mode.  
Adjust Magnification : Press the MAGNIFY  
mode.  
/
button in MAGNIFY  
MAGNIFY  
OFF  
Clear MAGNIFY Mode : Press the MAGNIFY  
button.  
The MAGNIFY mode is cleared by running or setting the AUTO, ASPECT, INPUT  
SELECT or VIDEO, or by changing the input signal.  
Set/Clear FREEZE Mode : Press the FREEZE button. The [  
II] icon is  
displayed, and the image is frozen, in the FREEZE mode.  
The FREEZE mode is cleared by running or setting POSITION, VOLUME, MUTE,  
Automatic Adjustment, BLANK ON/OFF, or MENU ON/OFF, or by changing the  
input signal.  
FREEZE  
Do not forget to clear frozen static images.  
NOTE • Strong light and obstacles will interfere with operation of the remote control transmitter.  
ENGLISH-10  
 
OPERATIONS (continued)  
Items indicated by (*) may be used from the control panel.  
Table 3. Basic Operation (continued)  
Item  
Description  
VOLUME  
Volume Adjustment : Press the VOLUME  
/
button.  
Set/Clear Mute Mode : Press the MUTE button. No sound is heard in the  
MUTE mode.  
MUTE  
AUTO  
Automatic Adjustment at RGB Input : Press the AUTO button. Horizontal  
position(H.POSIT), vertical position (V.POSIT),clock phase (H.PHASE), and  
horizontal size(H.SIZE) are automatically adjusted. Use with the window at  
maximum size in the application display.  
Automatic Adjustment at Video Input : Press the AUTO button. A signal  
type appropriate for the input signal is selected automatically. Valid only  
when AUTO is set for VIDEO on the menu.  
This operation requires approximately 10 seconds. It may not function correctly with  
some input signals.  
BLANK  
Set/Clear Blank Mode: Press the BLANK button. No image is displayed in  
ON/OFF  
the Blank mode. The screen color is as set in BLANK on the Image menu.  
Menu Display Start/Stop: Press the MENU button.  
The menu display is terminated automatically after approximately 10 seconds of  
inactivity.  
MENU  
ON/OFF (*)  
Select Menu Type: Press the MENU SELECT button. Allows the user to  
select the normal menu or the single menu. Only the selected item is  
displayed on the single menu, and other items are displayed with the  
buttons as with the normal menu.  
and  
Valid only when the Setup menu is used. Push the MENU SELECT button after  
selecting items such as "BRIGHTNESS".  
The MENU SELECT button may operate as the mouse control button. Refer to  
page 4.  
MENU  
SELECT  
Normal menu  
Single menu  
(MENU SELECT)  
SETUP  
INPUT  
IMAGE  
OPT.  
BRIGHT  
CONTRAST  
0
-2  
V
H
H
POSIT  
POSIT  
PHASE  
100  
100  
+1  
H
SIZE  
800  
COLOR BAL  
COLOR BAL  
ASPECT  
R
B
0
0
CONTRAST  
-2  
Set / Clear KEYSTONE Mode : Press the KEYSTONE  
Adjust KEYSTONE : Press the button.  
The image may not be appeared properly when this function is activated on same  
input signals.  
button.  
/
KEYSTONE  
(*)  
The adjustable range of distortion correction will be different among input signals.  
Download from Www.Somanuals.com. All Manuals Search And DownloadE. NGLISH-11  
OPERATIONS (continued)  
Setup Menu  
The following adjustments and settings are possible when SETUP is selected at the top of the menu. Part of the  
Setup menu differs between RGB input and video input. Select an item with the  
and  
buttons, and start  
operation. Use the Single menu to reduce menu size (see Table 3, MENU SELECT).  
SETUP  
BRIGHT  
CONTRAST  
V POSIT  
H POSIT  
H PHASE  
INPUT  
IMAGE  
OPT.  
SETUP  
BRIGHT  
CONTRAST  
SHARPNESS  
COLOR  
INPUT  
IMAGE  
OPT.  
0
+1  
+1  
0
0
0
0
SETUP  
BRIGHT  
CONTRAST  
COLOR  
INPUT  
IMAGE  
OPT.  
0
+1  
+1  
0
0
-2  
100  
100  
H PHASE  
+1  
0
0
TINT  
COLOR BAL  
COLOR BAL  
ASPECT  
R
B
H SIZE  
800  
COLOR BAL  
COLOR BAL  
ASPECT  
R
B
0
0
COLOR BAL R  
COLOR BAL B  
ASPECT  
COMPONENT  
RGB  
VIDEO/S-VIDEO  
Table 4. Setup Menu  
Item  
COMPONENT  
VIDEO  
S-VIDEO  
480i  
575i  
RGB  
720P  
Description  
1080i  
480P  
-
-
-
BRIGHT  
Dark  
Weak  
Down  
Left  
Light  
Strong  
Up  
CONTRAST  
V POSIT  
H POSIT  
-
-
-
Right  
Left  
Right  
H PHASE  
-
Adjust to eliminate flicker.  
Small  
Large  
The image may not be displayed correctly if the horizontal  
size is excessive. In such cases, press the RESET button,  
and initialize the horizontal size.  
H SIZE  
-
-
-
SHARPNESS  
COLOR  
-
-
-
-
Soft  
Light  
Clear  
Dark  
Red  
Green  
TINT  
-
-
-
Valid only when NTSC or NTSC 4.43 signal is received.  
COLOR BAL R  
COLOR BAL B  
Light  
Light  
Dark  
Dark  
Select Image Aspect Ratio :  
4:3[ 16:9[  
Select Position of Image:  
]
]
-
-
[
]
Press the  
selected.  
Center →  
button while 16:9  
is  
Down Up ( Center  
)
Select Image Aspect Ratio:  
4:3[ 16:9[  
Select Position of Image :  
ASPECT  
]
]
4:3small[  
]
Press the  
while 16:9[  
Center →  
button  
] / 4:3 small[  
-
-
] is selected.  
Up ( Center )  
Down →  
4:3 small may not be displayed correctly with some input  
signals.  
ENGLISH-12  
 
OPERATIONS (continued)  
Input Menu  
menu. Select an item with the  
SETUP  
AUTO  
RGB  
VIDEO  
HDTV  
INPUT  
IMAGE  
OPT.  
The following functions are available when INPUT is selected on the  
EXECUTE  
CANCEL  
and  
buttons, and start or stop  
operation with the and buttons. The function indicated (**) are  
effective on video input mode only, not on RGB input mode.  
Table 5. Input Menu  
Item  
Description  
Automatic Adjustment at RGB Input: Select the EXECUTE with the  
button. Horizontal position (H.POSIT), vertical position (V.POSIT), clock  
phase (H.PHASE), and horizontal size (H.SIZE) are automatically adjusted.  
Use with the window at maximum size in the application display.  
Automatic Adjustment at Video Input: Select the EXECUTE with the  
button. A signal type appropriate for the input signal is selected  
automatically. Valid only when AUTO is set for VIDEO on the menu.  
AUTO  
This operation requires approximately 10 seconds. It may not function correctly with  
some input signals. Pressing the AUTO button in this case may correct this problem.  
This function is the same as for the AUTO function in Basic operation.  
Displays RGB Input Frequency: Displays the horizontal and vertical sync  
signal frequencies for RGB input.  
RGB  
Valid only at RGB input.  
Select Video Signal Type: Select the signal type with the  
and  
buttons. Select NTSC, PAL, SECAM, NTSC4.43, M-PAL, or N-PAL as  
appropriate for the input signal. The selection of AUTO enables and  
executes the function AUTO (Automatic Adjustment at Video Input), except  
for the N-PAL input.  
Use this function when the image becomes unstable (eg. the image becomes  
irregular, or lacks color) at VIDEO/S-VIDEO input.  
VIDEO (**)  
Automatic Adjustment requires approximately 10 seconds. It may not function  
correctly with some input signals. Pressing the AUTO button in this case may correct  
this problem except for the N-PAL input.  
For the COMPONENT VIDEO input, this function is not effective and the signal type  
is distinguished automatically.  
Select HDTV mode: Select the 1035i mode or 1080i mode suitable for the  
input signal with the  
/
button.  
HDTV  
When the selected HDTV mode is incompatible with the input signal, the image  
may be incorrect (eg. the display position or color is incorrect).  
Download from Www.Somanuals.com. All Manuals Search And DownloadE. NGLISH-13  
OPERATIONS (continued)  
Image Menu  
SETUP  
INPUT  
IMAGE  
OPT.  
BLANK  
MIRROR  
The following adjustments and settings are available when IMAGE is  
START UP  
GAMMA  
COLOR TEMP  
selected on the menu. Select an item with the  
and  
buttons, and  
start or stop operation with the  
and  
buttons.  
Table 6. Image Menu  
Item  
Description  
Select Blank Screen Color: Select color with the  
/
button.  
BLANK  
The image is cleared and the entire screen is displayed in the selected color, when  
BLANK mode is set with BLANK ON, or when there is no signal for 5 minutes.  
MIRROR  
Select Mirror Status: Select mirror status with  
/
button.  
Setup Initial Screen Display: Select TURN ON with the  
Clear Initial Screen Display: Select TURN OFF with the  
button.  
button.  
START UP  
GAMMA  
Note that if TURN OFF is selected the blank screen is displayed in blue when there  
is no signal.  
Select Gamma mode: Select the gamma mode with the  
NORMAL CINEMA DYNAMIC  
/
button.  
Select Color Temperature:  
Select the color temperature mode with the  
NORMAL LOW  
COLOR  
TEMP  
/
button.  
ENGLISH-14  
 
OPERATIONS (continued)  
Options Menu  
SETUP  
VOLUME  
MENU COLOR  
LANGUAGE  
AUTO OFF  
SYNC ON G  
WHISPER  
INPUT  
IMAGE  
OPT.  
16  
The following adjustments and settings are available when OPT. is  
selected on the menu. Select an item with the  
start or stop operation with the  
and  
buttons, and  
and  
buttons.  
Table 7. Options Menu  
Item  
Description  
VOLUME  
Reduce  
Increase  
MENU COLOR Select Menu Background Color: Select with the  
/
/
button.  
button.  
LANGUAGE  
AUTO OFF  
Select Menu Display Language: Select with the  
Set AUTO OFF: Set 1~99 minutes with the  
/
button. The system  
automatically enters the standby mode when a signal is not received for  
the set time.  
Clear AUTO OFF: Select STOP (0 min.) with the  
button. When  
STOP is selected the system does not enter the standby mode even if  
no signal is received.  
SYNC ON G Valid: Select TURN ON with the  
SYNC ON G Invalid: Select TURN OFF with the  
May not be displayed correctly with some input signals when SYNC ON G is  
valid. In such cases, remove the signal connector so that no signal is received,  
set SYNC ON G to invalid, and reconnect the signal.  
button.  
button.  
SYNC ON G  
WHISPER  
Set / Clear WHISPER Mode: Press the  
/
button. When the  
WHISPER is selected, the WHISPER mode is active. In the WHISPER  
mode, acoustic noise level from the unit is reduced, and brightness level  
on screen is a little lower.  
Download from Www.Somanuals.com. All Manuals Search And DownloadE. NGLISH-15  
OPERATIONS (continued)  
No Signal Menu  
VOLUME  
BLANK  
MIRROR  
START UP  
MENU COLOR  
LANGUAGE  
AUTO OFF  
SYNC ON G  
WHISPER  
16  
The same adjustments and settings are available with the Image and  
Options menus when the MENU button is pressed during display of the  
“NO INPUT IS DETECTED ON ***” or “SYNC IS OUT OF RANGE  
ON ***” message while no signal is received.Select an item with the  
and  
buttons, and start or stop operation with the  
and  
buttons.  
Table 8. No Signal Menu  
Item  
Description  
Reduce  
Increase  
When this function is used, audio input is automatically switched to video. The  
audio input can be switched by moving the DISK PAD left and right during the  
display of the volume adjustment bar. The volume adjustment bar is displayed by  
VOLUME  
pressing VOLUME  
/
button.  
Select Blank Screen Color: Select the color with the  
/
button.  
When the blank mode is set with BLANK ON, by absence of a signal, or by  
input of a non-standard signal, the image is cleared and the complete screen is  
displayed in the selected color.  
BLANK  
MIRROR  
START UP  
Select Mirror Status: Select the mirror status with the  
/
button.  
button.  
Setup Initial Screen Display: Select the TURN ON with the  
Clear Initial Screen Display: Select the TURN OFF with the  
Note that if TURN OFF is selected the blank screen is displayed in blue when  
button.  
there is no signal.  
Select Menu Background Color: Select the color with the  
button.  
Select Menu Display Language: Select the language with the  
button.  
/
MENU COLOR  
LANGUAGE  
/
Set AUTO OFF: Set 1~99 minutes with the  
/
button. The system  
automatically enters the standby mode when a signal is not received for  
the set time.  
AUTO OFF  
Clear AUTO OFF: Select the STOP (0 min.) with the  
button. When  
the STOP is selected the system does not enter the standby mode even  
if no signal is received.  
SYNC ON G Valid: Select the TURN ON with the  
SYNC ON G Invalid: Select the TURN OFF with the  
May not be displayed correctly with some input signals when the SYNC ON G is  
valid. In such cases, remove the signal connector so that no signal is received,  
set the SYNC ON G to invalid, and reconnect the signal.  
button.  
button.  
SYNC ON G  
WHISPER  
Set / Crear WHISPER Mode: Press the  
/
button. When the  
WHISPER is selected, the WHISPER mode is active. In the WHISPER  
mode, acoustic moise level from the unit is reduced, and brightness  
level on screen is a little lower.  
ENGLISH-16  
 
MAINTENANCE  
Lamp  
HIGH VOLTAGE  
HIGH TEMPERATURE  
HIGH PRESSURE  
Contact BOXLIGHT before replacing the lamp.  
For the optional lamp, see the item “Optional Parts” of the Table 12.  
Before replacing the lamp, switch power OFF, remove the power cord from the power outlet, and  
wait approximately 45 minutes until the lamp has cooled. The lamp may explode if handled at high  
temperatures.  
WARNING A mercury lamp used in this LCD projector is made of glass and has high  
internal pressure. The mercury lamp can burst with a big noise due to deterioration  
resulting from a shock, crack and passage of time, and can end its service life in unlit  
condition. Lamps also have a considerably different service life and can sometimes end up  
in burst or turn to unlit condition soon after use. Furthermore, when the lamp is blown up,  
glass fragments can get scattered around the lamp house and some gas containing mercury  
inside the lamp can leak out of the projector’s air vent.  
• Handle the lamp with utmost care as it can burst during use if subjected to a shock or  
impact or if scratched or cracked.  
• Probability for the burst will increase if the lamp is used for extended period of time or  
used exceeding the period of replacement. You are advised to follow instructions for lamp  
replacement as soon as they are given (Refer to Table 9 of Page 20, Table 10 of Page 21).  
Avoid any reuse of an old lamp (used lamp) since such reuse can result in burst.  
• In case the lamp gets blown up in a short period of time after use, some electrical failures  
or troubles other than the lamp itself may be suspected as causes. Under such  
circumstances, consult BOXLIGHT.  
• Should the lamp burst (accompanied by a big bursting noise), perform ventilation  
sufficiently, and exercise maximum caution not to inhale any gas out of the projector’s air  
vent or not to let it enter your eyes or mouth.  
• Should the lamp burst (accompanied by a big bursting noise), make absolutely sure to  
unplug the power cord from the outlet.  
You should not engage in cleanup or replacement of the lamp by yourself since scattered  
glass fragments can damage the inside of projector or can result in personal injury when  
you handle it.  
• When you dispose of any used lamps, be sure to observe and follow local ordinances and  
regulations of the area or district where they are subjected to disposal. Generally speaking,  
the lamps are treated similarly as glasses and bottles in most cases, but there are areas or  
districts where lamps are classified as a separate collection, and so be sure to use caution.  
• Never use the lamp in a state where the lamp cover is removed.  
Lamp Life  
Projector lamps have a finite life. The image will become darker, and hues will become weaker,  
after a lamp has been used for a long period of time.  
Replace the lamp if the LAMP indicator is red, or the CHANGE THE LAMP message appears  
when the projector is switched ON. See Table 9 of P.20 and Table 10 of P.21.  
NOTE The LAMP indicator is also red when the lamp unit reaches high temperature. Before  
replacing the lamp, switch power OFF, wait approximately 20 minutes, and switch power ON again.  
If the LAMP indicator is still red, replace the lamp.  
Download from Www.Somanuals.com. All Manuals Search And DownloadE. NGLISH-17  
MAINTENANCE (continued)  
Replacing the Lamp  
1. Switch the projector OFF, remove the power cord from the  
power outlet, and wait at least 45 minutes for the unit to cool.  
2. Prepare a new lamp.  
3. Check that the projector has cooled sufficiently, and gently  
turn it upside down.  
4. Loosen the two screws as shown in the diagram, and remove  
the lamp cover.  
5. Loosen the three screws, and gently remove the lamp while  
holding the grips. Touching the inside of the lamp case may  
result in uneven coloring.  
6. Install the new lamp and tighten the three screws firmly.  
Also steadily push the opposite side of the screwed lamp into  
the unit.  
7. Replace the lamp cover in position and tighten the two  
screws firmly.  
8. Gently turn the projector right-side up.  
CAUTION • Ensure that screws are tightened  
properly. Screws not tightened fully may result  
in injury or accidents.  
• Do not use the projector with the lamp cover  
removed.  
Resetting the Lamp Timer  
Reset the lamp timer after replacing the lamp. When the lamp has been replaced after the LAMP  
indicator is red, or the CHANGE THE LAMP message is displayed, complete the following  
operation within ten minutes of switching power ON. The power will be turned off automatically in  
over 10 minutes.  
1. Switch power ON, and press the RESET button, for approximately three seconds. The ‘LAMP  
xxxx hr’ message will appear on the lamp timer on the bottom of the screen.  
2. Press the MENU button on the remote control transmitter, or the RESET button on the control  
panel, while the lamp timer is displayed. The ‘LAMP xxxx 0 I CANCEL’ message will  
then appear.  
3. Press the  
and select 0, and wait until the timer display is cleared.  
NOTE Do not reset the lamp timer without replacing the lamp. Reset the lamp timer always  
when replacing the lamp. The message functions will not operate properly if the lamp timer is not  
reset correctly.  
ENGLISH-18  
 
MAINTENANCE (continued)  
Air Filter  
Cleaning the air Filter  
The air filter should be cleaned as described below at intervals of approximately 100 hours.  
1. Switch the projector power supply OFF, and remove the power cord from the power outlet.  
2. Clean the air filter with a vacuum cleaner.  
Replacing the Air Filter  
Replace the air filter if contamination cannot be removed, or if it is damaged.  
1. Remove the filter cover.  
2. Remove the old filter.  
3. Set the new filter and the filter cover.  
CAUTION • Switch power OFF and remove the power cord from the power  
outlet before beginning maintenance work. Please read the separate “SAFETY  
INSTRUCTIONS” thoroughly to ensure that maintenance is performed correctly.  
• Replace the air filter if contamination cannot be removed, or if it is damaged.  
Contact BOXLIGHT for service. For the optional air filter, see the item “Optional  
Parts” of the Table 12.  
• Do not use the equipment with the air filter removed.  
• When the air filter is clogged with dust etc. the power supply is switched OFF  
automatically to prevent the temperature rising inside the projector.  
Other Maintenance  
Maintenance Inside the Equipment  
For safety reasons, ensure that the equipment is cleaned and checked by BOXLIGHT once every  
two years. Maintaining the equipment by yourself is dangerous.  
Cleaning the Lens  
Gently wipe the lens with lens cleaning paper. Do not touch the lens with your hands.  
Cleaning the Cabinet and Remote control transmitter  
Gently wipe with a soft cloth. If dirt and stains etc. are not easily removed, use a soft cloth  
dampened with water, or water and a neutral detergent, and wipe dry with a soft, dry cloth.  
CAUTION • Switch power OFF and remove the power cord from the power  
outlet before beginning maintenance work. Please read the separate “SAFETY  
INSTRUCTIONS” thoroughly to ensure that maintenance is performed correctly.  
• Do not use detergents or chemicals other than those noted above (e.g. benzene  
or thinners).  
• Do not use cleaning sprays.  
• Do not rub with hard materials, or tap the equipment.  
Download from Www.Somanuals.com. All Manuals Search And DownloadE. NGLISH-19  
TROUBLESHOOTING  
OSD Message  
The messages as described below may appear on the screen at power ON. Take the appropriate  
measures when such messages appears.  
Table 9. OSD Message  
Message  
Contents  
The usage time of lamp will be reaching 2000 hr  
shortly.(*2)  
It is recommended to replace the lamp soon. Prepare a  
new lamp as a replacement.  
CHANGE THE LAMP  
AFTER REPLACING LAMP,  
RESET THE LAMP TIME.  
(*1)  
The usage time of lamp will be reaching 2000 hr shortly.  
It is recommended to replace the lamp within * *  
hours.(*2)  
It might be happened that the lamp is cut off before * * hr  
by any chance. Power will be switched OFF  
automatically in * * hours. Replace the lamp as shown in  
P.17~18 Lamp. Always reset the lamp timer after  
replacing the lamp.  
CHANGE THE LAMP  
AFTER REPLACING LAMP,  
RESET THE LAMP TIME.  
THE POWER WILL TURN OFF  
AFTER ** hr.  
(*1)  
CHANGE THE LAMP  
AFTER REPLACING LAMP,  
RESET THE LAMP TIME.  
THE POWER WILL  
TURN OFF  
The usage time of lamp is about to reach. Power will be  
switched OFF in a few minutes.(*2)  
Switch power OFF immediately and replace the lamp as  
shown in P.17 ~18 Lamp. Always reset the lamp timer  
after replacing the lamp.  
AFTER 0 hr.  
NO INPUT IS DETECTED  
No input signal found.  
Check signal input connections and signal sources.  
ON ***  
The horizontal or vertical frequency of the input signal is  
not within the specified range.  
Check the specifications of the equipment and the signal  
source.  
SYNC IS OUT OF RANGE  
ON ***  
The internal temperature has risen.  
Switch power OFF, and wait 20 minutes until the  
equipment cools.  
Check the following and Switch power ON again.  
* Are the ventilation openings blocked.  
* Is the air filter dirty.  
CHECK THE AIR FLOW  
* Is the ambient temperature in excess of 35°C.  
NOTE (*1) This message is cleared automatically after approximately three minutes, and  
appears every time power is switched ON.  
(*2) The unit has a function to turn the power off which will be active when the usage time reaches  
2000 hr. However the life of lamp might be much different among lamps, so that it might be  
happened that a lamp is cut off before the function is active.  
ENGLISH-20  
 
TROUBLESHOOTING (continued)  
Indicators Message  
The POWER indicator, LAMP indicator, and TEMP indicator are lit and blank as follows. Take the  
appropriate measures.  
Table 10. Indicators Message  
POWER LAMP TEMP  
Contents  
indicator indicator indicator  
Lights  
Turns off Turns off The Standby mode has been set.  
orange  
Blinks  
Turns off Turns off Warming up. Please wait.  
green  
Lights  
Turns off Turns off ON. Normal operation possible.  
green  
Blinks  
orange  
Turns off Turns off Cooling. Please wait.  
Cooling. Please wait.  
Blinks red  
-
-
The error is found. Take the appropriate measures when the  
POWER indicator ceases blinking  
Lamp is not lit.  
The interior of the equipment may be too hot. Switch power OFF,  
wait 20 minutes until the equipment cools, and check whether the  
ventilation openings are blocked, whether the air filter is dirty, or  
whether the ambient temperature exceeds 35 °C. And switch  
power ON again. Replace the lamp if the same problem occurs.  
Blinks  
/Lights red  
Lights  
red  
Turns off  
Lamp or lamp cover is not found, or hasnt been fitted in correctly.  
Switch power OFF, and wait for 45 minutes until the equipment  
cools. Check fitting of the lamp and lamp cover, and switch power  
ON again. Contact BOXLIGHT if the same problem occurs again.  
Blinks  
/Lights red  
Blinks  
red  
Turns off  
The cooling fan is not operating.  
Blinks  
/Lights red  
Blinks Switch power OFF, and wait for 20 minutes until the equipment  
Turns off  
cools. Check for foreign matters in the fan, and switch power ON  
again. Contact BOXLIGHT if the same problem occurs again.  
red  
The interior of the equipment is too hot.  
Switch power OFF, and wait for 20 minutes until the equipment  
cools. Check whether the ventilation openings are blocked,  
whether the air filter is dirty, or whether the ambient temperature  
exceeds 35 °C. Then switch power ON again. Contact BOXLIGHT  
if the same problem occurs again.  
Blinks  
/Lights red  
Turns off Lights red  
The interior of the equipment is too cool.  
Lights  
green  
Blinks  
red  
Blinks Check whether the ambient temperature is below 0°C. Contact  
BOXLIGHT if the same problem occurs when the ambient  
red  
temperature is 0~35°C.  
NOTE When the internal temperature becomes excessive power is switched OFF automatically  
for safety reasons, and the indicator is extinguished. Set the power switch to [  
O] and wait for 20  
minutes until the equipment has cooled sufficiently.  
Download from Www.Somanuals.com. All Manuals Search And DownloadE. NGLISH-21  
TROUBLESHOOTING (continued)  
Symptom  
Before requesting repair, consult the following chart. If the situation cannot be corrected, then  
contact BOXLIGHT at 800-762-5757 or 360-779-7901.  
Table 11. Symptom  
Symptom  
Possible cause  
Remedy  
Page  
The main power switch is not  
turned on.  
Turn on the main power switch.  
8,9  
The power cord is  
disconnected.  
Plug the power cord into an AC  
power outlet.  
The power is not  
turned on.  
Turn off the projector with the main  
power switch (set the power switch  
The main power was  
disconnected during operation to [O]), and wait for about 20  
by the power failure and so on. minutes. When the equipment has  
cooled enough, turn power on.  
9
Use the projector or remote control  
The input is not correctly set.  
10  
7,8  
7,8  
transmitter to set.  
No video or audio.  
No signal input.  
Connect correctly.  
The projector is not correctly  
connected.  
Connect correctly.  
Press VOLUME  
control or display the menu screen  
and adjust the volume.  
on the remote  
Video is present but  
no audio.  
The volume is set to minimum.  
11,15  
Mute is turned on.  
11  
7,8  
12  
9
Press the MUTE  
Connect correctly.  
button.  
The projector is not correctly  
connected.  
Audio is present but  
no video.  
Select BRIGHT with the MENU  
button and the press the  
The brightness adjustment knob  
is rotated fully clockwise.  
button.  
The lens cap is still attached.  
Remove the lens cap.  
Colors are pale and Color density and color  
color matching is  
poor.  
matching are not correctly  
adjusted.  
Adjust the video.  
12  
Brightness and contrast are not  
correctly adjusted.  
Adjust the video.  
12  
17  
The lamp is nearing the end of  
its service life.  
Images are dark.  
Video is blurred.  
Replace with a new lamp.  
Clear WHISPER mode.  
Adjust the focus or H PHASE.  
WHISPER mode is set.  
15  
Focus or H PHASE is out of  
adjustment.  
9,12  
ENGLISH-22  
 
SPECIFICATIONS  
Table 12. Specifications  
Item  
Specification  
Product name  
Liquid crystal projector  
Panel size  
2.3 cm (0.9 type)  
TFT active matrix  
Liquid  
crystal  
panel  
Drive system  
Pixels  
480,000 pixels (800 horizontal x 600 vertical)  
Zoom lens F=1.7 ~ 2.1 f=36.8 ~ 47.8 mm  
200 W UHB  
Lens  
Lamp  
Speaker  
1.0W+1.0W (stereo)  
Power supply  
Power consumption  
Temperature range  
Size  
AC100 ~ 120V, 3.3A / AC220 ~ 240V, 1.4A  
310W  
0 ~ 35°C (Operating)  
298 (W) x 94.6 (H) x 228 (D) mm  
3.25 kg  
Weight (mass)  
Video: Analog 0.7Vp-p, 75terminator (positive)  
H/V. sync.: TTL level (positive/negative)  
Composite sync.: TTL level  
1
2
RGB IN  
RGB  
signal  
D-sub 15-pin shrink jack  
input  
1
2
200mVrms, 50 k(max. 3.0Vp-p)  
Stereo mini jack  
AUDIO IN  
1.0Vp-p, 75terminator  
RCA jack  
VIDEO IN  
Brightness signal: 1.0Vp-p, 75terminator  
Color signal: 0.286Vp-p (NTSC, burst signal),75terminator  
0.300Vp-p (PAL/SECAM, burst signal),75terminator  
Mini DIN 4-pin jack  
S-VIDEO IN  
Video  
signal  
input  
Y
1.0 Vp-p, 75 Terminator (Positive)  
CB/PB 0.7 Vp-p, 75 Terminator (Positive)  
CR/PR 0.7 Vp-p, 75 Terminator (Positive)  
COMPONENT  
VIDEO  
L
200mVrms, 50 k(max. 3.0Vp-p)  
RCA jack  
AUDIO IN  
R
Video: Analog 0.7Vp-p, 75output impedance (positive)  
H/V. sync.: TTL level (positive/negative)  
Composite sync.: TTL level  
RGB OUT  
Signal  
output  
D-sub 15-pin shrink jack  
200mVrms, output impedance 1 k(max. 3.0Vp-p)  
Stereo mini jack  
AUDIO OUT  
CONTROL  
USB  
D-sub 15-pin shrink plug  
USB jack (B type)  
Control  
functions  
Lamp: CP635I-930 (DT00431)  
Air Filter: MU01421  
Optional Parts  
* For others, consult your dealer.  
NOTE This specifications are subject to change without notice.  
Download from Www.Somanuals.com. All Manuals Search And DownloadE. NGLISH-23  
WARRANTY  
LIMITED WARRANTY  
BOXLIGHT CORPORATION("BOXLIGHT") warrants that each Boxlight CP-635i ("the Product") sold  
hereunder will conform to and function in accordance with the written specifications of BOXLIGHT. Said  
limited warranty shall apply only to the first person or entity that purchases the Product for personal or business  
use and not for the purpose of distribution resale. Said warranty shall continue for a period of two (2) years from  
the date of such purchase. BOXLIGHT does not warrant that the Product will meet the specific requirements of  
the first person or entity that purchases the Product for personal or business use. Lamp is warrantied for 120  
days.  
BOXLIGHT CORPORATION's liability for the breach of the foregoing limited warranty is limited to the repair  
or replacement of the Product or refund of the purchase price of the Product, at BOXLIGHT's sole option. To  
exercise the Purchaser's rights under the foregoing warranty, the Product must be returned at the Purchaser's sole  
cost and expense, to BOXLIGHT or any authorized service center provided, however, that the Product must be  
accompanied by a written letter explaining the problem and which includes (i) proof of purchase; (ii) the dealer's  
name; (iii) the model and serial number of the Product. A return authorization number, issued by the  
BOXLIGHT customer service department, must also be clearly displayed on the outside of the shipping carton  
containing the Product.  
WARRANTY LIMITATION AND EXCLUSION  
BOXLIGHT CORPORATION shall have no further obligation under the foregoing limited warranty if the  
Product has been damaged due to abuse, misuse, neglect, accident, unusual physical or electrical stress,  
unauthorized modification, tampering, alterations, or service other than by BOXLIGHT or its authorized agents,  
causes other than from ordinary use or failure to properly use the Product in the application for which said  
Product is intended.  
DISCLAIMER OR UNSTATED WARRANTIES  
The warranty printed above is the only warranty applicable to this purchase.  
All other warranties express or implied, Including, but not limited to, the implied warranties or merchantability  
and fitness for a particular purpose are disclaimed. There are no warranties that extend beyond the face of hereof  
and the forgoing warranty shall not be extended, altered or varied except by written instrument signed by  
BOXLIGHT CORPORATION.  
LIMITATION OF LIABILITY  
It is understood and agreed that BOXLIGHT's liability whether in contract, in tort, under any warranty, in  
negligence or otherwise, shall not exceed the return of the amount of the purchase price paid by purchaser and  
under no circumstances shall BOXLIGHT be liable for special, indirect or consequential damages. The price  
stated for the Product is a consideration in limiting BOXLIGHT's liability. No action regardless of form, arising  
out of the agreement to purchase the product, may be brought by purchaser more than one year after the cause of  
action has accrued.  
Boxlight  
19332 Powder Hill Place  
Poulsbo, WA 98370-7407-USA  
U.S. and Canada 800-762-5757  
International 360-779-7901  
ENGLISH-24  
 
Printed in Japan  
*QR53221*  
 

Bionaire Humidifier BCM7255 CN User Manual
Black Decker Battery Charger BC40EB User Manual
Black Decker Coffeemaker DDCM200 User Manual
Black Decker Saw BDCD2204KIT User Manual
Broan Ventilation Hood QS330BC User Manual
Carrier Ventilation Hood ERVCCLHU User Manual
Casio Computer Monitor 700AR1A User Manual
Casio Printer IT 3000 User Manual
Chamberlain Garage Door Opener PD210 1 2 HP User Manual
Chicago Electric Welding System 67102 User Manual